 Specifications:
Ridley Rotary C-10 |
|
Models |
|
C-10SL |
9 hp air motor
drive; 6-15 cu. yd./hr. |
|
C-10HHD |
Hydraulic motor:
direct drive; 6-15 cu. yd./hr. |
|
Configurations |
|
Hose Length |
100 ft. |
|
Feed Bowl |
15-pocket, square or
round corners |
|
Hose Size (ID) |
Production Rate |
Air Compressor Size
(100 psi) |
Max. Aggregate |
|
1 1/2" (3.8cm) |
1-6 cu.yd./hr.
(4.5
cu.m./hr.) |
365 cfm
(10.5 cu.m./min.) |
3/8" minus (10mm) |
|
1 5/8"
(4.2cm) |
7-8 cu.y./hr.
(6.1 cu.m./hr.) |
450 cfm (12.7
cu.m./min.) |
3/8"
minus (10mm) |
|
2" (5.1cm) |
9-15 cu.y./hr.
(11.5 cu.m./hr.) |
600-900 cfm
(17 cu.m./min.) |
3/4"
minus (19mm) |
|
Dimensions |
|
Length |
Width |
Height |
Weight |
|
37" (94cm) |
28" (71cm) |
41" (104cm) |
740 lbs.
(335kg) |
|
|
|
|
|
 |
Easy
4-Step Process!
1. Pre-mixed material is fed into the
hopper down into the u-shaped,
15" diameter pocket feed system.
2. The feed system rotates via
heavy-duty oil bath spur gear drive
as material drops into the pockets.
3. The air source propels the material
through the discharge outlet.
4. The material is conveyed by air through the hose to
the nozzle, where water is added and the material
is hydrated to the desired slump. |
|
Performance is relative to
cycle rate, mix characteristics, line size and distance.
Max output, line pressure and distance can not be achieved
simultaneously. We reserve the right to amend these
specifications at any time. |
|
